Quill Water Header Tank 125L
Couldn't load pickup availability
The Quill Water Tanks are perfect for storing water in any location. Popular for collecting rainwater, storing stock solutions, providing clean animal drinking water and available in a wide range of sizes including 20L, 40L, 125L and 250L.
- Moulded from strong, UV-resistant HDPE to last for years
- Internal baffles reduce movement when transporting
- Suitable for storage and transportation of liquids
Available in translucent 'natural' for easily checking water levels or algae-resistant 'green' for outdoor use.
Please note: ONLY water tanks without ball-valve & float will be fitted with a basket filter.
Dimensions: 109cm x 48cm x 29cm
Optional extras:
- BSP Tank Outlet System
- BSP Tank Connector
- Basket Filter
- Ballvalve arm
- Ballcock Float Horizontal Entry
- Water Header Tank Cap
- Plasson 8mm Hose Tail Connector 1/2"
Connecting your Water Tank to Mains Water
1) Can I connect a hose pipe to the ball valve and float?
Yes — by using a Hozelock ½”–¾” Tap Connector.
2) Can we automatically refill the tank?
Yes — you can order the tank with a ball valve and float, which we will fit before dispatch.
3) What fitting will I need to connect to the Ball Valve & Float (Inlet)?
The ball valve is a ½” male fitting, so you will require one of the following:
- Plasson Female Thread Adaptor 10mm x 1/2" or Plasson Female Threaded Adaptor 25mm x 3/4"
- Threaded Reducing Bush ¾” x ½”
- 90D Elbow with Female Offtake (20mm x 1/2") or (25mm x 1/2")
To connect onto a hose pipe, use the Hozelock ½”–¾” Tap Connector
If using MDPE pipe fittings, you may also require Pipe Liners or PTFE Tape.
4) Which side is the ball valve and float fitted?
The ball valve and float are fitted on the same side as the outlet inside the recess at the optimal height for a full tank.
5) Does a filter come with the header tank?
Yes — a filter is supplied when ordering a header tank without a ball valve and float.
6) What is the yellow part shown in the photo?
This is a ½” bung, which can be removed to allow fittings to be added for the outlet.
7) Can you see the water levels in the natural/translucent tank?
Yes — the water level is visible through the translucent tank.
8) Do you have fittings to connect 8mm pipe to the header tank?
Yes — use a Plasson 8mm Hose Tail Tank Connector (½”).
9) What fitting would you use on the (outlet)?
The outlet on the tank is ½” female thread, so you will require one of the following:
You will also require a Threaded Reducing Bush ¾” x ½” with a Plasson 90D Elbow with Male Offtake 20mm or 25mm x 1/2"
If using MDPE pipe fittings, you may also require Pipe Liners or PTFE Tape.
10) Can we order spares?
Yes — we offer spare bungs, ball valves & floats, lids, filters, and fittings.
Please contact the office for further support on 01258 818239.
Shipping Policy
Shipping Policy
Shipping charges are calculated dependent on the size and weight of your order. Find out more.
